Off-grid yard · Sole-source
30kVA — Repaired, Not Replaced
A site's only power source arrived dead. Repaired, serviced and modernised with remote start and monitoring rather than replaced at several times the cost.
Read case studyRemote commercial · Industrial · Uptime
Power for sites where downtime has a price.
Standby and prime generators, planned servicing and off-grid power for remote commercial and industrial sites — where a power failure costs stock, process time or an SLA, not just an evening in the dark.
- Sets
- Standby & prime
- Supply
- Single & 3-phase
- Servicing
- Planned contracts
- Monitoring
- Where it earns it
When an outage has a cost per hour
On a remote commercial site, power isn't a convenience — it's part of the operation. A distillery mid-run, a fish farm's aeration, a quarry's plant, a telecoms mast, a visitor centre in season: when the supply drops, the clock starts on lost stock, missed process or a breached service level, and help is a long way off.
These sites share the awkward realities of anywhere rural — long runs, difficult access, three-phase loads, a grid connection that was never robust — but with the added pressure that "we'll sort it tomorrow" isn't an option. The right answer isn't just a bigger generator; it's a set sized to the loads that actually matter, the changeover to bring it on automatically, and a servicing arrangement that keeps it ready.
We design around uptime and the paperwork that goes with it: what has to keep running, for how long, and the records that prove it was done properly when an insurer or auditor asks.
Sites we power
Built for the hard-to-reach.
Telecoms & mast sitesDistilleriesFish farmsQuarries & extractionVisitor centresConstruction compoundsWorkshops & yardsWater & pumping
01
Prime power where there's no grid
For sites with no adequate mains at all, a prime set sized and specified for continuous work — not a standby unit pressed into a job it wasn't built for.
02
Standby with automatic transfer
Where there is a supply, an automatic set that takes over within seconds of an outage — before the process, the stock or the SLA is affected.
03
Three-phase & distribution
The three-phase generation, changeover and distribution work that industrial and process equipment actually needs, handled by one contractor.
04
Planned servicing contracts
Scheduled visits with a written record each time, so problems are found on a booked visit — not during the outage the set was bought for.
05
Remote monitoring where it earns its place
On the hardest-to-reach sites, monitoring can flag a developing fault before a call-out. We fit it where it's genuinely worth it, not as a default upsell.
06
Records your insurer will accept
Commissioned under load, with test readings recorded and a written handover pack — the documentation that stands up when someone asks for it.
Uptime you can plan for
The cheapest outage is the one that never happens.
Most commercial failures aren't sudden — they're a developing fault on a set nobody has looked at in a year or two, on a site where getting someone out is slow and expensive. Planned servicing turns that into a scheduled visit with a written record, and where it's worthwhile we add remote monitoring so a problem is flagged before it becomes an outage.
One contractor sizes, installs, commissions and then services the set — so there's one number to call and one person who knows the site.
Planned servicing & repairCommercial work
Real jobs, real constraints.
Three-Phase · Workshop
23kVA Three-Phase Supply
A workshop full of three-phase machinery and no supply to run it. A 23kVA set became the primary supply, with changeover for whole-site standby.
Read case studyLet's talk about your project.
No obligation — tell us about your site and we'll be straight with you about what makes sense.
Get in Touch
Prefer to talk it through? Call +44 7356 289964
Get in Touch
Tell us about the site.
Remote commercial or industrial — tell us what has to keep running and what an outage costs you, and we'll come back with honest advice and a clear price.
Contact details
📞
Phone+44 7356 289964
✉️
Emailinfo@usherwoods.com
🌍
Service AreaRemote and rural sites across Scotland
What happens next? We'll reply to every enquiry — usually with a phone call to talk through your project, then a site visit and a clear written quote.
FAQ
Common questions.
How quickly can you respond to a breakdown?
Honestly, it depends where the site is and the weather — we won't pretend otherwise. What we will do is be straight about realistic response times up front, and steer you towards planned servicing so a breakdown is far less likely to be the first time anyone looks at the set. A booked visit beats an emergency call-out every time on a remote site.
Do you offer planned servicing contracts?
Yes — for sites where downtime has a real cost, a scheduled annual service is the whole point. It means the visit happens because it's booked, not because someone remembered, and you get a written record each time. See generator servicing and repair.
Can you provide remote monitoring?
Where it's genuinely useful and the equipment supports it, yes — monitoring lets performance and faults be seen without a site visit, which matters most on the hardest-to-reach sites. We'll tell you honestly whether it's worth it for your setup rather than selling it as standard.
Do you handle three-phase and prime power?
Yes. Remote commercial sites often need three-phase, and some need prime power because there's no adequate mains at all. Both are routine — sized to the real load, with the changeover and distribution work around them.